I recently tried baking a classic New York cheesecake in my tiny convection oven, which has a quirky hot spot near the back. I followed the recipe closely, baked it at 325°F for about 50 minutes, but while the center is perfectly creamy, the edges come out burnt and dry. I even tried rotating the pan halfway through, but it didn’t help much. I’m using a springform pan without a water bath since my oven is too small to fit one. Has anyone dealt with uneven baking like this in a convection oven? Would lowering the temperature and extending the bake time help? Or should I try insulating the pan somehow to prevent those burnt edges? Also curious if a water bath is absolutely necessary or if there’s a workaround for small ovens.

On 01/31/2026 at 5:40 PM, thebaker said:

I recently tried baking a classic New York cheesecake in my tiny convection oven, which has a quirky hot spot near the back. I followed the recipe closely, baked it at 325°F for about 50 minutes, but while the center is perfectly creamy, the edges come out burnt and dry. I even tried rotating the pan halfway through, but it didn’t help much. I’m using a springform pan without a water bath since my oven is too small to fit one. Has anyone dealt with uneven baking like this in a convection oven? Would lowering the temperature and extending the bake time help? Or should I try insulating the pan somehow to prevent those burnt edges? Also curious if a water bath is absolutely necessary or if there’s a workaround for small ovens.

That hot spot sounds like a real challenge! Lowering the temperature to around 300°F and extending the bake time definitely helps in my experience with convection ovens, especially for delicate things like cheesecake. The edges get less intense heat that way, so they don’t dry out or burn as quickly.

Since your oven is tiny and a water bath won’t fit, you might try wrapping the outside of your springform pan with a wet towel or even a double layer of heavy-duty foil. It acts as a makeshift insulation to slow down the heat hitting the edges. Just be sure it’s snug and doesn’t drip water into the batter.

Also, if you haven’t already, try placing the pan on a lower rack and maybe adding a baking stone or heavy tray underneath to even out the heat distribution. It’s not perfect, but it’s helped me tame quirky ovens before!