Posts: 1,059
Threads: 81
Joined: Oct 2009
Reputation:
21
09-03-2010, 03:19 PM
(This post was last modified: 09-13-2010, 11:26 PM by Omniscient.)
I have 3 hard drives, 1 main and 2 slave drives or how ever you call 'em.
Well, these 2 others aren't working fine, when ever I open them, my CPU goes to 100% and PC starts lagging
Posts: 1,782
Threads: 167
Joined: Oct 2009
Reputation:
71
How old are your slave drives?
Does your system run fine when your not looking in them?
If so then you may find one of them is on its way out.
Have you noticed any scratching sort of noised from them?
Posts: 124
Threads: 9
Joined: Sep 2010
Reputation:
6
Just take it out, clean it and put in again.
Posts: 1,059
Threads: 81
Joined: Oct 2009
Reputation:
21
1. I don't know how old, but few years for sure.
2. Yes, my system is fine, without touching them.
4. No scratching noise.
@Vampire.
I have cleaned them once already, did not fix it.
Posts: 164
Threads: 10
Joined: Aug 2010
Reputation:
1
By open do you mean plug it in, or just double click it?
You may need more power supply.
Posts: 1,350
Threads: 67
Joined: Oct 2009
Reputation:
31
Since you said you haven't reformatted in awhile, back up all your important files, reformat and reinstall. If that doesn't work then your HDDs may be on their way out.
Posts: 16
Threads: 4
Joined: Sep 2010
Reputation:
0
Do complete scandisk and tick for mark bad sectors.
Posts: 110
Threads: 7
Joined: Sep 2010
Reputation:
5
well only being a few years old is pretty new? maybe reformat?
Posts: 221
Threads: 15
Joined: Aug 2010
Reputation:
8
Hmm you could be connecting to them on the wrong speed or it is really lagging when you are trying to connect to them(Which can be common) try diskchecking them like suggested and see if that speeds it up a bit.