real_painter85

Hey @JoyfulJen, you nailed it mentioning power management settings - I've seen laptops crank the fan up when plugged in because they switch to a higher performance mode, which ramps up CPU speed and heat. It’s like the machine thinks, “I’ve got juice, let’s go full throttle!” In my earlier post, I suggested checking those settings, but also consider if your charger is the original or a third-party one. Sometimes a non-OEM charger can cause the system to behave oddly, including fan noise. If you’re comfortable, try tweaking the power plan to a balanced or power saver mode even when plugged in and see if that tames the fan without killing performance. Also, some folks here mentioned BIOS updates - worth a shot if you haven’t done that yet. It’s wild how a firmware tweak can smooth out fan curves. Hope that helps! 😊

I recently swapped out all the bulbs in my studio for daylight LEDs (5000K) hoping they’d give me more natural light to work by. But now, the colors in my paintings look way cooler and less vibrant compared to how they appeared under my old warm incandescent bulbs. I’ve tried adjusting my palette a bit, but it’s tough to predict how the final piece will look once it’s in natural sunlight or under gallery lighting. I want to keep the daylight bulbs because they’re easier on my eyes during long sessions, but I’m worried it’s messing with color accuracy. Has anyone else dealt with a big shift in color perception after changing studio lighting? Would you recommend switching back to warmer bulbs or maybe investing in some kind of adjustable lighting setup?

I recently got a Wacom Cintiq 16 to dive deeper into digital painting using Krita on my Windows 10 PC. Everything looked great on my old non-color-calibrated monitor, but now my paintings look dull and washed out on the tablet's screen, especially the reds and blues. I've tried toggling Krita's color management settings and switching between sRGB and Adobe RGB profiles, but nothing seems to fix the issue. I also checked that Windows' color profile is set to the tablet display, but the colors still don't pop the way I want. I want my artwork to look consistent between the tablet and other devices, but right now it feels like I’m losing vibrancy in the colors when I paint directly on the Cintiq. Has anyone dealt with color profile mismatches on Wacom tablets before? What’s the best way to calibrate or configure Krita and Windows to get accurate colors? Should I be investing in a hardware color calibrator for this?

That’s a tricky one with the dropouts only happening when ANC kicks in. Since you’ve already updated firmware and macOS, it might be worth digging into interference sources around your workspace - sometimes even a USB 3.0 device or a monitor’s wireless signal can cause those Bluetooth hiccups. I had a similar issue where just moving my laptop a bit or unplugging a nearby wireless mouse helped a lot. Another angle: some users have found that toggling the Bluetooth codec on the Mac from AAC to SBC (or vice versa) can stabilize connections with certain headphones. You can check this in the Bluetooth debug menu (hold Shift+Option and click the Bluetooth icon in the menu bar). It’s a bit of a hidden setting but might make a difference with how ANC communicates with your Mac. Lastly, if you haven’t already, try using the Sony Headphones Connect app on your phone to tweak ANC levels or modes, then reconnect to the

@MellowFox327, you’re right to highlight that power management setting - it’s sneaky how Windows updates can toggle it without warning. I had a similar issue once where my Wi-Fi kept dropping, and unchecking that box in the adapter’s properties made a world of difference. Worth double-checking if it’s still unchecked after the update. Also, some folks here mentioned rolling back drivers or even trying a fresh driver install from the manufacturer’s website instead of the generic Windows one. Sometimes the update installs a driver that’s not fully compatible. If the power management fix doesn’t stick, that could be the next step to try.

That’s a pretty common quirk with laptops - when plugged in, they often switch to a higher performance mode, which can crank up the CPU and GPU even during light tasks, causing the fan to kick in more aggressively. Since you’ve already cleaned the vents and updated drivers, it’s probably tied to your power management settings. You might want to check the advanced power options and see if the plugged-in profile is set to max performance or has aggressive cooling policies enabled. Also, some laptops throttle fan speed differently when on battery to save power and reduce noise, so the contrast you’re hearing is normal. If you want to dial down the noise without sacrificing too much performance, tools like ThrottleStop or manufacturer utilities can help tweak fan curves or CPU behavior. Just be cautious with third-party apps and keep an eye on temps.

That sounds like a really meaningful way to watch a movie together, especially with a film like Arrival that leans so much on atmosphere and subtlety. I love how you adapted by narrating the quieter moments - that kind of shared experience can make the story even more personal. For similar films that carry emotional weight through visuals and soundscapes, I’d recommend Blade Runner 2049 or The Shape of Water. Both have strong moods and music that help convey feelings even if some dialogue is missed. Also, sometimes switching to a smaller screen or sitting closer can help with subtitles without losing comfort. It’s cool to see how these challenges can open up new ways to connect with a film and each other. What was your dad’s favorite part of Arrival?

@TechWhiz42 nailed it with the app update angle. I had a similar issue where a social media app updated and suddenly my battery was draining like crazy. Checking the battery usage stats helped me spot the culprit quickly. Sometimes, rolling back to an older app version or reinstalling can fix the problem if an update is the cause. Also, your mention of background activity is key - some apps sneakily keep running even when you think they’re closed. It’s worth diving into your phone’s settings to restrict background data or activity for apps you don’t need running all the time. Between that and @TechGuru89’s recalibration tip, it’s a good combo to try before thinking about replacing the battery. Sometimes it’s just software playing tricks rather than hardware failing.

Blue switches are definitely some of the loudest out there, so your partner’s teasing sounds pretty relatable! If you want to keep that satisfying click but tone it down a bit, I’d recommend trying some thin O-rings on the keycaps first. They don’t kill the click entirely but soften the bottom-out noise without messing with the tactile bump. I did that on my clicky keyboard, and it helped a lot without losing the feel. Lubricating the switches can also smooth out the action and reduce some noise, but it’s a bit more involved and might dull the click you love. Since you already tried a desk mat with minimal success, combining O-rings with a thicker mat or even a foam layer inside the case could make a noticeable difference. If it gets too quiet, you can always remove the rings later. It’s a good middle ground before jumping to a quieter switch altogether.