+- Support Forums (https://www.supportforums.net)
+-- Forum: Categories (https://www.supportforums.net/forumdisplay.php?fid=87)
+--- Forum: Computer Support Topics (https://www.supportforums.net/forumdisplay.php?fid=4)
+---- Forum: PC Hardware Help and Desktop Support (https://www.supportforums.net/forumdisplay.php?fid=9)
+---- Thread: Overclocking (/showthread.php?tid=17800)
Overclocking - Splodge0007 - 04-07-2011
Does anybody have a rather in-depth OC guide? Personally when I up my voltage up a slight bit and up my bus speed by about 10 then reboot, I'm stable for about 10 minutes until I BSOD. It's odd because It's only a ~300mhz increase OC per 10 on the bus clock.
My components are :
Intel i7 860 @ 2.8 (Turbo mode on, which adds an extra multiplier, so I'm at 3.08)
Gigabyte GA-P55A-UD3
I've never really overclocked before, so any help is appreciated. I mean, I know the basic concepts and how to do it. It's just I'd like a nice in-depth guide that one of you have found helpful.
Thanks.
RE: Overclocking - Deltron - 04-07-2011
Try creating a thread here:
http://www.overclock.net/intel-cpus/
RE: Overclocking - prince of persia - 04-11-2011
(04-07-2011, 06:51 PM)Deltron Wrote: Try creating a thread here:
http://www.overclock.net/intel-cpus/
Is there any tutorials for a 2600K?
RE: Overclocking - Sam - 04-14-2011
Do you know your Bus speeds? Do you still need help.
RE: Overclocking - Splodge0007 - 04-15-2011
Yes Sam. Current at 140 on the bus speed. I recently went back to try again. I upped my voltage a slight tad and upped the bus speed to 150. I booted up fine without any issues, however within around 10 minutes I was faced with a BSOD.
I really do not understand quite what I'm doing wrong.
RE: Overclocking - Spooony - 04-22-2011
(04-07-2011, 01:32 PM)Splodge0007 Wrote: Does anybody have a rather in-depth OC guide? Personally when I up my voltage up a slight bit and up my bus speed by about 10 then reboot, I'm stable for about 10 minutes until I BSOD. It's odd because It's only a ~300mhz increase OC per 10 on the bus clock.
My components are :
Intel i7 860 @ 2.8 (Turbo mode on, which adds an extra multiplier, so I'm at 3.08)
Gigabyte GA-P55A-UD3
I've never really overclocked before, so any help is appreciated. I mean, I know the basic concepts and how to do it. It's just I'd like a nice in-depth guide that one of you have found helpful.
Thanks.
http://www.techreaction.net/2011/01/04/3-step-overclocking-guide-–-sandy-bridge-v0-1beta/
(04-11-2011, 02:59 PM)prince of persia Wrote: Is there any tutorials for a 2600K?http://www.techreaction.net/2011/01/04/3-step-overclocking-guide-–-sandy-bridge-v0-1beta/